If trimming your beard leaves tiny hairs across the bathroom basin, a portable beard vacuum cleaner could be a simple way to make grooming easier. I picked up the Anko Portable USB Beard Vacuum Cleaner from Kmart to see how it works, how easy it is to use, and whether it can collect the loose hair left behind after shaving.
Stage One: Unboxing the Anko Beard Vacuum
The Anko beard vacuum comes in a compact package with the main unit and a USB charging cable. There are no complicated accessories to sort through, which makes the first impression quite straightforward. The device is small enough to hold comfortably and should fit easily into a bathroom drawer, travel bag, or grooming kit.
The unit has a rounded upper section and a collection container underneath. Its design is fairly simple, which is useful for a product intended to perform one specific task. There are no large controls, display panels, or settings to work through before using it.
Inside the box, I found:
- The Anko Portable USB Beard Vacuum Cleaner
- A USB charging cable
- The removable lower collection section built into the unit
The included cable means you can charge the vacuum from a USB power adaptor, computer, power bank, or another compatible USB charging source. The packaging does not appear to include a wall charger, so you will need to use one that you already have.
The unboxing process is quick because there are not many parts. That is probably a good thing for this type of product. A beard vacuum should be ready to use without requiring a lengthy setup process, and this one follows that simple approach.
Before testing it, I wanted to understand how the power control worked. The top section is not a traditional switch. Instead, you press the upper part down to start the device. This keeps the design neat, but it also means you need to know where to press before using it for the first time.
How the power control works
To start the vacuum, push down on the top section. Once pressed, the motor begins running. Releasing the pressure stops the unit, so you operate it by holding the top section down while moving it around the area where the hair has collected.
This is a different approach from a normal power button. It feels more like a press and hold control. That may be helpful because the device is less likely to run accidentally inside a bag, although it also means one hand needs to remain on the top while you are cleaning.
The main steps are simple:
- Make sure the beard vacuum has been charged.
- Keep the lower cover and collection section attached.
- Press down on the upper section.
- Move the vacuum over the loose beard hair.
- Release the upper section when the area is clean.
One important detail became clear during the first check. The device does not appear to operate when the cover is removed. This suggests that the cover needs to be fitted correctly before the motor can run. It also prevents the unit from being used while the collection area is open.
Key insight: Keep the cover attached during operation. The beard vacuum appears to rely on the cover being in place before the motor will start.
Stage Two: Charging and Preparing the Unit
The Anko beard vacuum is charged through USB. This makes it convenient if you already have USB charging equipment at home or if you want to take it away on a trip. A power bank would also be useful when camping, travelling, or staying somewhere without an easily accessible bathroom power point.
One limitation is that the unit does not provide an obvious battery level indicator. You cannot look at the device and see whether it is nearly full or nearly empty. Because of that, it is better to charge it before using it, particularly if you are planning to take it away from home.
The lack of a battery indicator is not necessarily a major problem for occasional grooming, but it does affect planning. If you use the vacuum every few days, you may need to develop your own charging routine. For example, you could connect it to a charger after cleaning the bathroom or charge it on a regular day each week.
For a portable device, a predictable charging habit is more useful than waiting for the battery to become completely empty. It also reduces the chance of starting a grooming session and finding that the motor does not have enough power.
Charging checklist
- Use a suitable USB power source.
- Charge the unit before your first test.
- Charge it before placing it in a travel bag.
- Do not assume the battery is full just because the unit starts.
- Store the cable somewhere easy to find.
There is also no clear indication from the basic design about exactly how long the device takes to charge or how long it operates on one charge. Rather than making a precise claim, it is sensible to treat the battery as something to manage through regular charging.
This is a small grooming appliance, so the main convenience comes from its compact size and wireless use. You are not tied to a wall socket while collecting the hair. However, the benefit depends on remembering to charge it and keeping the lower cover fitted properly.
Stage Three: Understanding the Collection Container
The lower section of the beard vacuum is the collection container. This is where the loose hair is gathered while the motor is running. To open it, push the bottom section out. Once opened, you can see the collected hair and remove it from the device.
The container is not a large dust chamber. That is not surprising given the portable size of the product. It is designed to collect the small amount of hair produced during trimming or shaving rather than replace a household vacuum cleaner.
When the collection section is closed, the unit has a compact shape that is easy to hold. When it is opened, the collected hair can be accessed for disposal and cleaning. The section can then be pushed back into place.
The basic cleaning process is:
- Turn the beard vacuum off.
- Push out the lower collection section.
- Empty the loose hair into a bin.
- Wash the collection area if needed.
- Allow the washable section to dry completely.
- Push the section back into the unit before the next use.
The hair may be difficult to see at first because beard trimmings are small and can sit against the inside surface of the container. Opening the bottom section makes the result easier to check. Even if the device looks empty from the outside, there may be a layer of fine hair inside.
Why cleaning matters
Cleaning is especially important with a beard vacuum because the collected material is fine and lightweight. Hair can settle around the edges of the container or near the internal opening. If it is left there, the collection area may become less pleasant to use over time.
The washable design makes regular maintenance easier. Instead of trying to reach every small piece with a dry cloth, you can rinse the appropriate section. However, the whole electrical unit should not be treated as waterproof. Keep water away from the motor, charging port, and other electrical areas unless the product instructions specifically say otherwise.
A safe routine is to remove the collection section, wash only the part intended for cleaning, and let it dry fully before putting it back. Do not charge the device while it is wet.
- Empty the container after each grooming session.
- Check the edges for trapped hair.
- Wash the removable collection section when required.
- Dry all washable parts before reassembly.
- Keep the charging connection clean and dry.
Practical reminder: A small collection container can fill more quickly than expected because beard hair takes up space unevenly. Check it after every use rather than waiting until the device looks full.
Stage Four: Setting Up a Practical Test
To test the vacuum properly, I first created a small amount of loose hair from a shaver. This gave the unit something realistic to collect and made it easier to judge whether the motor was doing its job.
Testing a product like this does not need a complicated laboratory setup. The useful questions are practical:
- Does the motor start easily?
- Can the device collect loose beard hair from a surface?
- Is it comfortable to hold?
- Does the collection container capture the hair?
- Is the container easy to empty?
- Can the washable section be cleaned without much effort?
For the test, I placed the shavings on a surface and moved the beard vacuum around them while holding the top section down. I used a gentle circular movement rather than pressing the device firmly into the surface. This is similar to how someone might use it around a basin after trimming.
It is worth remembering that beard hair behaves differently depending on its length, texture, and moisture. Very fine hair may move around before being collected. Longer pieces may need more than one pass. Damp hair can also behave differently from dry trimmings, so the most useful test is with normal dry hair produced during a regular grooming session.
Practice prompt: test the area in sections
If you want to test your own unit, divide the messy area into small sections. Start with a few trimmings rather than spreading hair across the entire basin. This makes it easier to see where the device has collected hair and where another pass is needed.
- Place a small amount of dry beard hair on the surface.
- Start the vacuum by pressing the upper section.
- Move it slowly across the hair.
- Pause and inspect the surface.
- Repeat the movement over any remaining hair.
- Open the collection area to check what was captured.
This method gives you a clearer idea of the vacuum’s performance than simply running it over a large pile. It also helps you learn how quickly to move the unit. Moving too quickly may leave some hair behind, while moving more slowly gives the suction time to collect the trimmings.
Stage Five: Testing the Vacuum on Beard Trimmings
With the unit switched on, I moved it around the loose shavings. The vacuum made a decent first impression during this basic test. It collected the beard hair from the surface as I moved it around, and the results were visible when I opened the lower container.
The device is not intended to clean a large area like a household vacuum. Its purpose is much narrower. It is designed to pick up the small mess created during beard maintenance, and that is the situation where its compact size makes sense.
The most effective approach was to guide it around the area instead of expecting it to collect everything instantly from one position. Twirling or moving the unit around the trimmings helped bring the loose hair towards the intake area.
Some remaining hair may not be obvious while the vacuum is running. Beard trimmings are small and can blend into the colour of the basin or surface underneath. This means it is useful to stop the device occasionally and inspect the area under good lighting.
After the test, I opened the lower container and found the collected hair clips inside. The amount was enough to show that the unit had captured the shavings rather than simply moving them around the surface.
The result can be described fairly as a decent collection performance for a compact personal grooming device. It is not a complete substitute for wiping down the basin, but it can reduce the loose hair that would otherwise need to be removed by hand.
What the test shows
The first test highlights several useful points:
- The unit starts by pressing down on the upper section.
- The cover needs to remain attached for the device to operate.
- The vacuum can collect dry beard shavings from a surface.
- Moving the device around the hair improves the result.
- Some fine hair may still need a second pass.
- The collected hair can be seen inside the lower container.
- The container can be opened for emptying and washing.
There is also a practical difference between collecting most of the hair and leaving a perfectly spotless surface. The Anko beard vacuum performed the first task during this test. After using it, you may still want to wipe the basin with a tissue or damp cloth, particularly if very fine hairs remain.
That does not make the vacuum ineffective. It simply places the product in the right category. This is a quick collection tool that can make cleanup easier, not a complete bathroom cleaning system.
Key insight: Use the beard vacuum to collect the bulk of the loose trimmings first, then use a quick wipe for any fine hairs that remain.
Stage Six: Using It Without Making a Bigger Mess
A beard vacuum is most useful when it is used as part of a simple grooming routine. If you move too quickly or hold it too far above the surface, the hair may scatter before it reaches the intake. A controlled movement is more effective.
Try to keep the lower part of the device close to the surface without pressing hard. Move it in small circles or short passes across the area. If the trimmings are spread out, start around the edges and guide the device towards the centre.
It can also help to prepare the area before trimming. A clear basin gives the hair fewer places to hide and makes it easier to see the result. Bright bathroom lighting is useful because fine beard hair can be difficult to spot on a pale surface.
A straightforward routine could look like this:
- Clear personal items away from the basin.
- Trim or shave as normal.
- Leave the loose hair in one manageable area.
- Hold the beard vacuum with the cover fitted.
- Press the upper section to start the motor.
- Move slowly across the trimmings.
- Inspect the basin and repeat where necessary.
- Empty and clean the container.
This approach keeps the cleanup focused. Rather than chasing individual hairs across the whole bathroom, you are using the vacuum where the mess is concentrated.
Checkpoint: Is it suitable for your routine?
At this point, the main question is not whether the device can collect any hair. The test shows that it can. The more useful question is whether its size, charging method, and cleaning process fit the way you groom.
The product may suit you if:
- You regularly trim your beard over a bathroom basin.
- You want a small device for quick cleanup.
- You prefer a rechargeable product rather than a disposable solution.
- You already have USB charging equipment.
- You are happy to make a second pass or wipe the surface afterwards.
- You want something that can be stored in a drawer or travel bag.
You may prefer another solution if:
- You need to clean a large area.
- You want a visible battery level display.
- You expect every hair to be collected in one pass.
- You do not want to wash a removable collection section.
- You usually trim in a location without a suitable surface for collection.
Stage Seven: Benefits and Limitations at a Glance
The strongest feature is the simple idea behind the product. Beard trimming creates a small but annoying cleaning job, and this device is designed to deal with that job directly. Its value comes from convenience rather than advanced settings.
The main limitation is the lack of information about the battery level. Since the device does not show how much charge remains, you need to remember to charge it. The compact container is another limitation, although it is appropriate for the small amount of hair produced during a normal grooming session.
The testing also suggests that the best result comes from treating the vacuum as one step in the cleanup process. It can collect the loose shavings, but a final wipe may still be useful for the finest hairs.
Stage Eight: Cleaning and Storage Routine
After testing, the collected hair was visible inside the bottom section. This makes it easy to understand where the shavings go and confirms that the container is doing its job.
To clean it, push the lower section out and empty the contents. If hair has gathered around the edges, remove it carefully before washing the appropriate part. A rinse should help remove the smaller pieces, but allow the section to dry completely before placing it back into the device.
Do not rush the drying step. Even though the container is designed to be cleaned, moisture near an electrical appliance can create problems. Keep the main unit and charging port dry, and follow the care instructions supplied with the product.
For storage, the beard vacuum can remain in a dry bathroom drawer or grooming area. If you are keeping it in a travel bag, make sure the container is empty first. Loose hair left inside the device can spill into the bag, which defeats the purpose of having a cleaner grooming kit.
Storage checklist
- Empty the collection container.
- Check for hair around the container edges.
- Wash the removable section when needed.
- Dry the section fully.
- Fit the cover securely.
- Store the USB cable with the unit.
- Charge the device before a longer trip.
Keeping the cable with the device is especially helpful because the unit does not use a standard removable battery. A small pouch or drawer compartment can keep everything together and reduce the chance of misplacing the cable.
What to Learn Next: Building a Better Grooming Setup
The Anko Portable USB Beard Vacuum Cleaner works best when it is paired with a tidy, repeatable grooming setup. You do not need a large collection of products. A clear basin, a reliable trimmer, a small mirror, and a simple cleanup tool can be enough for a practical routine.
Before your next use, pay attention to three things. First, charge the vacuum in advance because there is no obvious battery level indicator. Second, keep the cover attached because the unit appears unable to operate without it. Third, move slowly across the trimmings and inspect the surface afterwards.
These small habits make the product easier to use and give you a more consistent result. The device is compact, simple, and focused on one task: collecting the beard hair left behind after grooming.
Once the first test shows what the Anko Portable USB Beard Vacuum Cleaner can and cannot do, the next step is turning it into a reliable part of a normal grooming routine. The device is most useful when it saves time after trimming, rather than when it is treated as a complete bathroom cleaning solution.
Stage Four: Build a Repeatable Grooming Routine
A small appliance becomes more valuable when it is easy to use without much thought. The Anko beard vacuum works best as the final step in a simple sequence: prepare the area, trim carefully, collect the loose hair, inspect the surface, then clean the device.
Checkpoint: Prepare the area before trimming
Before switching on the trimmer, remove anything from the basin that could get covered in hair. This includes toothbrushes, face washers, bottles and other items sitting near the sink. A clear surface gives the vacuum more room to work and makes any remaining hair easier to see.
It also helps to keep the bathroom lighting bright. Fine beard hair can be difficult to spot on a pale basin, particularly when it is spread across a large area. Strong lighting makes the final inspection much more accurate.
- Clear the basin and nearby bench.
- Keep the vacuum within easy reach.
- Check that the collection cover is fitted correctly.
- Make sure the device has enough charge.
- Trim over one controlled area instead of moving around the bathroom.
This preparation is more important than it sounds. A vacuum can only collect hair that reaches its suction opening. If the trimmings fall across the tap, wall, floor and vanity, the cleanup task becomes much less efficient.
Checkpoint: Keep the trimmings concentrated
The easiest test area is the basin itself. Try to keep your face close to the basin while trimming and avoid brushing loose hair onto surrounding surfaces. If the trimmings form a small group, the Anko cleaner can work through them in a more controlled way.
For longer beard hair, trimming in several smaller sections can also help. Large pieces may collect differently from very fine shavings, so separating the process gives the vacuum a better chance of picking up everything that is loose.
This view is useful for understanding the compact scale of the appliance. It is small enough to keep beside other grooming items, but that also means the collection section is designed for short cleanups rather than a large volume of hair.
Practice prompt: Test your usual trimming position
For your next trim, notice where the hair actually lands. Does most of it stay in the basin, or does it spread onto the tap and bench? Do you trim quickly in one area, or do you move your head around? The answer will show whether the main improvement should come from the vacuum or from changing your trimming position.
In my testing, using slower movements made a noticeable difference. Moving the cleaner rapidly across the basin looked efficient, but it gave the suction less time to collect fine pieces. A steady pass close to the surface was more dependable.
Key insight: The Anko vacuum is most effective when it is used as a controlled collection tool, not waved over the bathroom like a general purpose cleaner.
Stage Five: Improve the Collection Technique
The next level is learning how to position the device. Suction performance depends on distance, speed and the direction of movement. These details are simple, but they affect the result more than pressing the button for longer.
Use short, overlapping passes
Start at one edge of the trimmed area and move the cleaner towards the other side. Once you reach the edge, make a second pass that slightly overlaps the first. This approach reduces the chance of leaving narrow strips of hair between each movement.
Do not press the opening hard against the basin. The cleaner needs enough space for air to move into the suction area. At the same time, holding it too high above the surface can reduce its ability to collect small hairs. A close and comfortable position is the best balance.
Use the following sequence as a practical routine:
- Switch the vacuum on by pressing and holding the upper section.
- Place the opening close to the largest visible group of hair.
- Move slowly across the surface.
- Pause briefly over fine pieces that do not move immediately.
- Work through the area in overlapping sections.
- Switch off and inspect the basin from several angles.
Because the control needs to be held while the cleaner is running, the process is slightly less convenient than using a device with a separate on and off switch. However, the control is straightforward and does not require learning a complicated interface.
Know when a second pass is worthwhile
A second pass is normal. Beard hair is light, and some pieces can stick to a damp surface or remain in the corners of the basin. The first pass should remove the bulk of the mess. The second pass is for the fine leftovers.
If only a few hairs remain, a damp tissue or cloth may be faster than trying to vacuum the entire basin again. This is one of the practical limits of the product. It reduces cleanup, but it does not eliminate the need for a quick visual check.
The visual purpose of this image is to show the recommended working position: close to the basin, moving slowly and focusing on a small section at a time. Keeping the scene uncluttered also reflects the simple routine that makes the cleaner easier to use.
Checkpoint: Inspect from more than one angle
After vacuuming, step back and look across the basin rather than only looking straight down. Fine hair can disappear against a white surface from one angle and become obvious from another. Checking around the drain, tap base and basin edge is particularly worthwhile.
- Look around the drain opening.
- Check the rear edge of the basin.
- Inspect the tap base and nearby bench.
- Look for hairs caught in moisture.
- Use a cloth for the final few pieces if needed.
This inspection also tells you how well your technique worked. If the same area repeatedly needs wiping, change the direction of the next vacuum pass or move more slowly over that section.
Stage Six: Compare the Device with Other Cleanup Options
The Anko Portable USB Beard Vacuum Cleaner is not the only way to manage beard trimmings. Its main appeal is convenience. It sits between doing nothing and carrying out a full bathroom clean, which makes it useful for regular maintenance.
This comparison places the Anko cleaner in the right category. It is a small convenience appliance for a specific task. It is not intended to replace a household vacuum, a cloth or normal bathroom maintenance.
For someone who trims regularly, the time saving can still be worthwhile. Removing the loose hair before it spreads reduces the amount of wiping required. The benefit is less about powerful suction and more about having a dedicated tool nearby when the mess is fresh.
Who is most likely to appreciate it?
- People who trim their beard at home several times a week.
- People sharing a bathroom who want to leave the basin tidy.
- Travellers who want a compact grooming cleanup device.
- Users who prefer a rechargeable tool rather than disposable tissues.
- Anyone who dislikes loose hair gathering around the basin.
Who may not need it?
- People who rarely trim facial hair.
- Users who already trim outdoors or over a towel.
- Anyone expecting the cleaner to remove wet hair and general bathroom dirt.
- People who prefer washing the basin immediately after every trim.
- Users who need a large collection container for frequent heavy grooming.
The decision comes down to routine rather than novelty. If the device is kept charged and stored close to the grooming area, it can become a useful habit. If it is placed in a drawer with no charge, it will probably be forgotten.
Stage Seven: Clean and Maintain the Vacuum
Cleaning the Anko vacuum is a necessary part of owning it. Hair left inside the collection section can reduce capacity, create an unpleasant smell and make the next use less hygienic. The good news is that the maintenance routine is simple when completed immediately.
Empty the collection section after use
Once the device is switched off, separate the removable collection section according to the product design. Empty the hair into a bin rather than washing it down the sink. Beard hair can gather with other debris and may contribute to a blocked drain over time.
Tap the removable section gently over the bin. If fine pieces remain around the edges, use a dry tissue or a soft brush to remove them. Avoid using sharp objects because they may damage the plastic or internal filter area.
This screenshot supports the cleaning stage by showing the removable lower section that holds the collected hair. Keeping this area clear is important because its capacity is limited and the device is intended for small, regular cleanups.
Wash only the washable section
The removable collection part can be washed when required, but the motor housing and charging port must remain dry. This distinction is important. Water near the electrical section may damage the appliance or create a safety risk during charging.
A safe maintenance process is:
- Switch the cleaner off.
- Disconnect it from the USB cable.
- Remove the collection section.
- Empty the hair into a bin.
- Rinse the washable section if it needs more than dry cleaning.
- Allow the section to dry completely.
- Reassemble the cleaner only when no moisture remains.
Do not charge the device while any removable part is wet. It is better to leave the section separated for longer than to rush the process and trap moisture inside.
Protect the motor and charging port
Wipe the outer motor housing with a lightly damp cloth if necessary, then dry it straight away. Avoid immersing the main body and do not direct water into openings. The USB port should also be checked occasionally for dust or hair before connecting the cable.
Storage matters as well. Keep the cleaner in a dry location where the cover will not be knocked off. A small basket beside the trimmer can work well, provided the bathroom area is not constantly exposed to water.
Maintenance rule: Empty the collection section after every use, wash it only when needed, and store the motor body dry.
Stage Eight: Manage Charging and Storage
The USB charging system makes the Anko cleaner flexible. It can be connected to a suitable wall adaptor, computer or power bank, which is convenient at home and while travelling. The tradeoff is that the device does not provide a clearly visible battery indicator or detailed runtime information.
Use a simple charging habit
Rather than waiting until the battery is empty, charge the cleaner after several uses or whenever the motor sounds weaker than usual. A regular charging habit reduces the chance of discovering an empty battery just before trimming.
It is also sensible to keep the cable with the cleaner. If the cable is stored in a different room, charging becomes an extra task and the appliance may be left unused. A small labelled container or grooming drawer can keep the device and cable together.
- Charge before a planned trim.
- Keep the USB cable in the same storage area.
- Do not store the cleaner while the collection section is damp.
- Keep the charging port away from splashes.
- Disconnect the cable when charging is complete and the device is ready for storage.
For travel, the compact shape is helpful. It takes up less room than a large household vacuum and can be powered from a common USB source. Pack it in a small pouch so hair from previous use does not transfer to clothing or other items.
This screenshot is relevant to the storage and charging stage because it shows the simple portable form of the cleaner. The lack of complicated accessories makes it easy to include in a travel grooming kit.
Practice prompt: Create a ready to use station
Choose one location where the trimmer, Anko cleaner and charging cable can stay together. The aim is to remove small barriers between deciding to trim and completing the cleanup. A ready station may be as simple as a basket beside the bathroom mirror.
Keep the collection section empty and dry at the start of each session. This gives you maximum capacity and makes it easier to tell whether the device is collecting hair properly.
Stage Nine: Use the Results to Decide Whether It Fits Your Routine
A product review is most useful when it leads to a practical decision. After several uses, consider the result rather than relying only on the first impression. Ask whether the device makes trimming easier, whether it reduces wiping and whether cleaning the device is a fair trade for the time saved.
Simple evaluation scorecard
Based on the testing, the strongest benefit is the reduction of loose dry hair around the basin. The cleaner collected a useful amount and made the aftermath neater. It did not remove every fine hair in one movement, so a final inspection remained part of the routine.
The design is also easy to understand. There are no complicated settings, extra attachments or unusual controls to learn. Press and hold the upper section, move slowly over the surface and empty the lower section when finished.
What could be improved?
A clearer battery indicator would make the product easier to manage. Without one, it is difficult to know how much charge remains before a grooming session. More detailed information about charging time and expected runtime would also help users plan regular use.
The collection container could be larger for people with thick or long beards. A longer running control could improve comfort too, although the existing press and hold design keeps operation simple and helps prevent accidental activation.
These limitations do not make the product unusable. They simply show that the cleaner is designed for short, routine sessions rather than heavy duty cleaning.
Takeaway Checklist for Everyday Use
The following checklist turns the review into a quick routine that can be repeated without much effort.
- Clear the basin before trimming.
- Keep your face and trimmer positioned over one main area.
- Check that the Anko cleaner is charged.
- Fit the collection cover before switching it on.
- Press and hold the upper section during operation.
- Move the cleaner close to the surface at a steady speed.
- Use overlapping passes over fine or scattered hair.
- Inspect the basin, drain and nearby bench.
- Use a cloth for the few pieces the vacuum misses.
- Empty the collection section into a bin.
- Wash only the removable section when necessary.
- Dry every washable component completely.
- Store the cleaner and USB cable together.
The main lesson from testing the Anko Portable USB Beard Vacuum Cleaner is that technique and routine matter as much as the motor. When used on dry hair, close to a clear surface and with slow controlled movements, it performs a useful cleanup job. It is compact, uncomplicated and convenient for frequent beard maintenance.
Its limits are easy to manage when expectations are realistic. The battery status is not obvious, the container is small and the cleaner may need a second pass or a final wipe. Those points are worth remembering before purchase, particularly if you want one appliance to handle every type of bathroom mess.
For a person who trims regularly and wants less hair left around the basin, the device offers a practical improvement. The best next step is to add it to a consistent grooming station, keep it charged, and test the short pass technique until the cleanup becomes automatic.
Frequently Asked Questions
What comes with the Anko Portable USB Beard Vacuum Cleaner?
The package includes the beard vacuum cleaner, a USB charging cable and the removable lower collection section built into the unit. A wall charger does not appear to be included, so you will need to use a compatible USB power source.
How do you turn on the Anko beard vacuum?
Press and hold the upper section of the device to start the motor. The vacuum stops when you release the pressure, so you need to keep holding it down while moving the unit over loose beard hair.
Can the beard vacuum operate without the cover attached?
The device does not appear to operate when the cover is removed. Keep the lower cover and collection section fitted correctly while using the vacuum.
How is the Anko beard vacuum charged?
The unit charges via USB and can be connected to a USB power adaptor, computer, power bank or another compatible charging source. As there is no obvious battery level indicator, it is best to charge the device before using it or taking it travelling.
How do you empty and clean the collection container?
Turn off the vacuum, push out the lower collection section and remove the collected hair. The section can then be cleaned as appropriate and pushed back into place before the next use.
